Grafting fruit trees and fruit varieties is a combination of a cutting or a bud of one species with another for subsequent splicing. This method is quite often used in gardening. In the article we will tell you exactly how to carry out this procedure.
- General rules for grafting fruit in spring
- Graft grading by graft
- Budding
- Copulation
- Interlacing
- How to plant fruit trees in the spring, grafting methods
- Graft Splitting (Split)
- Graft bark (and graft bark graft)
- Side-Grafting
- Inoculating a saddle over the bark
General rules for grafting fruit in spring
Before proceeding to the procedure, it is necessary to carefully read the recommendations and its features. On how well the event will be implemented, the further growth and fruiting of the tree depends.
To learn how to plant trees, we suggest that you familiarize yourself with the general rules of procedure:
- A positive result is possible only when healthy trees that have an annual growth are planted.
- Usually more than one variety is not grafted onto one stock, but in rare cases, if necessary, high-growth varieties are grafted to the lower part of the crown, and those that grow weakly to the upper part of the crown.
Only varieties that have one maturity can be grafted onto one tree. If this period is different, there is a possibility that fruiting will not occur at all, or there will be no harvest of the species, the maturation of which occurs later.
- Grafting trees in May is carried out exclusively on those branches or shoots that are well developed and are located closer to the trunk, but not less than 20 cm from it. At the end of the branch, vaccinations are prohibited.
Cutting cuttings is recommended in December, until the time of severe frosts. They are stored in the refrigerator or wrapped in film and buried in a snowdrift of snow located on the north side of the house so that the sun does not fall on it and it does not melt. If a tinting of a pear or an apple tree is planned, a basement will be suitable for storing their graft: bury them in sawdust or sand, this will save them from mice. Frost-resistant varieties are recommended to be cut in early spring, before buds begin to swell.Choose thicker cuttings and be sure to tag them with special tags.
- Did you know? Grafting fruit trees - rather ancient procedure. For the first time it began to implement five thousand years ago. This is indicated by many historical facts.When using short cuttings having from one to three buds, the next year you can get a rich increase. But cuttings that have a greater length and a greater number of buds, will begin to bear fruit earlier.
- Depending on the type of fruit, there are certain periods when grafting is done in the spring. First of all, this procedure is performed with stone-seed cultures. If there is no severe frost, you can start the vaccination at the end of February. Seed fruit trees are best planted a little later - in late April - early May. It is recommended to choose a day so that it is overcast, but there was no strong wind and precipitation. It is mandatory to disinfect the fixture and tool for grafting fruit trees before carrying out the procedure.
- When grafting fruit trees and shrubs, a graft pruner is also used.It is very important to properly care for the plants after the event. In a certain period, it is necessary to remove the insulation, spray insecticides to protect the trees from pests. It is also recommended to regularly irrigate and feed trees. With too much growth it is shortened by a third in June.
- After the tinting of cherries or other trees is completed, the grafting site is carefully fixed and isolated. It should not get moisture and dirt. You can wrap this place with plastic and tie it in two places. If the procedure is carried out behind the bark, the end of the stock is closed with clay, and after the stalk has taken root, it is removed.
It is important to know not only when it is possible to plant trees, but also at what time the harness is removed. Usually this procedure is carried out in the middle of July, but if you notice that the shoot is growing very quickly, you should tie the strapping again.
- Usually the very next year after grafting, the branches begin to bloom.But do not allow their fruiting - it will weaken them. It is recommended to perform the removal of entangled fruit If desired, leave a few fruits to understand what kind of variety.
Remember that cuttings of fruit trees require special care, so it is very important to give them attention and care if you want to achieve positive results of your work.
Graft grading by graft
There are several methods that can be used for grafting fruit trees. Before proceeding with this procedure, it is worthwhile to find out which method is better suited, examine all its advantages and disadvantages, and only then carry out the inoculation of garden trees.
Budding
Budding - One of the most common ways of grafting plants. It attracts attention with its efficiency and low time costs. It is worth starting to do budding immediately after the bark began to flake off. It is necessary to do the preparation: on the crown, about seven branches are left, directed in different directions, up to 1 cm thick, the branches are cut from the lower part.For budding, it is better to choose shoots up to one year old with strong wood and formed buds.
Budding trees is performed in the following sequence:
- First of all, free the stock from weeds, complete its hilling.
- Then the flap is made. For this it is necessary to cut a healthy kidney, which is located in the center of the cutting.
- In the next step, select a smooth area on the bark and wipe it with a cloth.
- On the bark it is necessary to make an incision in the T-shape and insert a shield into it.
- At the final stage, wrap the vaccinated area with a film to speed up the engraftment process.
Grafting plants with this method is quite simple, if you follow the sequence of actions. Manipulation of this method is recommended in July.
Copulation
This method is used if the stock and graft are of the same thickness and relatively thin. It consists in oblique incision of both branches, and this incision should have one angle and the same length - about 4 cm. Then the sections are joined and a tight winding is applied, fixing two branches. Fruit trees usually copulate in April. Sometimes a more advanced method is used - vaccination with a tongue. Since with this method the cuts fit more closely to each other, they, accordingly, take root better. The method consists in the implementation of small splits resembling tongues.
Then they are combined in such a way that the tongues come over each other. To secure the procedure, it is necessary to put a tight bandage on the junction.
Interlacing
It is a fairly simple method of vaccination, but it is rarely used today. It consists in splicing adjacent branches by attaching them to each other. We offer you to read the step-by-step instruction:
- The bark is removed from the graft and rootstock, after which identical cuts are made on the same level.
- After this, the branches are applied to each other. Make sure that the cambial slices of the slices coincide as much as possible.
- At the next stage, it is necessary to wrap the junction with a special material and cover it with clay.
- Near the site of vaccination is usually located branch of the mother plant. It should be tied with wire.
You can start holding events from May to September.
How to plant fruit trees in the spring, grafting methods
Today, various methods of grafting fruit trees are used. We offer to get acquainted with the main ones.
Graft Splitting (Split)
This method is usually used in the period when the kidneys begin to swell. It consists in performing the following manipulations:
- The size of the cross section at the stock should be larger than that of the cutting. The tree is cut at a distance of 5 cm from the ground. The cut is cracked and a slot is made in it.
- Then you need to prepare the stalk: count two buds, make the bottom of the hanger. The size of each will be 25% of the total diameter. A little lower is also worth making two cuts in a wayso that a wedge is formed as a result.
- At the next stage - insert the cutting into the slot. The cuts should fit snugly together.
- Then fix the structure: put a bandage around the circle, and place the cut on the cut.
This is the most common method, but there are other ways how to vaccinate fruit trees in the spring, which we describe below.
Graft bark (and graft bark graft)
The main disadvantage of this method is the unstable position of the cutting in the first year, which often leads to its damage.
When using this method, a vertical cut is made in the bark, its length should be no more than 5 cm, after which it is necessary to bend the bark. Cut the cutting at an angle and insert it into the pocket of the bark. Side-Grafting
If you plan to use this method, you need to retreat from the ground about 15 cm and incise the bark near the root collar, going down to 1/3 of the thickness of the branch. After that, two oblique cuts are made on the handle from different sides.
Insert the cutting into the incision on the branch so that their sections are adjacent to each other. Apply a spiral bandage. Inoculating a saddle over the bark
This method includes the following steps:
- At a distance of about 5 cm from the ground cut fruit.
- On the formed stump, an incision of the bark is made about 2.5 cm.
- Two buds fall back on the handle, cut the shoulder and make a wedge-shaped cut down from it.
- The stalk is inserted into the incision of the bark so that it rests against the incision of the tree.
- At the final stage it is necessary to put a tight bandage on the cut and treat it with a twist.
After reading the article, you learned how to tint trees. This information will be useful for any gardener.