How to make a greenhouse "butterfly"

Quite often, gardeners are faced with the need to grow plants in greenhouses or greenhouses.

Large facilities are not very convenient, so we suggest that you familiarize yourself with the how to make a butterfly greenhouse do it yourself and design his size drawings.

Description and design features

In the unfolded state, the design very much resembles a butterfly, which has spread its wings. A closed structure is like a cocoon, thanks to its sealing, it is possible to maintain the required temperature and humidity.

Depending on the needs of the gardener, A greenhouse may have different sizes and configurations. The frame is usually made of plastic or metal-plastic profiles.Polycarbonate or polyethylene is preferably used as a coating. The main feature of the greenhouse is the rational use of the site. Thanks to the opening frames you can get free access to the plants.

Also, the design is highly durable and can withstand strong gusts of wind and snowfall. The greenhouse has good ventilation, which is carried out using special vents. Doors are opened using shock absorbers, which significantly increases the lifetime of the structure.

A greenhouse butterfly made of polycarbonate is able to retain heat, it is quite simple to make and assemble it yourself.

Its advantage is mobility - you can move the structure to any place. It can grow seedlings, melons and gourds, flowers and a variety of vegetables all year round.

Required material and tools

If you decide to build a butterfly garden yourself, for this You will need the following materials:

• profiled tube 20x20, wall thickness 2 mm;
• hinges;
• drill;
• polycarbonate 3x2.1m;
• self-tapping screws;
• plastic caps;
• pens;
• the boards.

Besides Do not do without the following tools:

• hammer;
• pipe bender;
• welding machine;
• drill;
• knife.

With the help of these materials and tools, you can easily build a polycarbonate "butterfly" greenhouse on your own.

Step-by-step instructions for making

If you want to create really quality construction, then we suggest to get acquainted with the instruction for its production.

Base and arcs

The first step is to make the base of the greenhouse. To do this you will need a profile tube. It is necessary to cut off 2 strips with a length of 2 m and 2 - with a length of 1.16 m. Of them it is necessary to weld the base of the structure.

In order to make arcs, 4 pipes 2 m long each will be required. With the help of a pipe bender, they are bent so that their diameter is 1.12 m.After 4 arcs are made, 2 of them should be welded to the base.

Sash

The manufacture of the valves is as follows:

• First you need to install the upper jumper, welding it to the side arcs. To it with the help of hinges are attached pipes, which will be part of the valves.
• Then you need to take the remaining 2 arcs and cut them into half-arcs, which should be welded to the pipe, fixed with hinges to the jumper.
• A pipe is also welded to the bottom of the half-arc; a sash is obtained.

By the same principle, the second flap is made. After the frame is assembled, it is necessary to clean and paint it.

Sheathing

Next stage - sheathing designs. It consists of the following stages:

• The frame is drilled holes for mounting polycarbonate around the perimeter of the valves and on the base of the greenhouse.
• Semicircles are cut out of polycarbonate to seal the lateral parts of the structure.
• Self-tapping polycarbonate is attached to the frame.
• Then cut the polycarbonate for the "wings" and in the same way attached to the frame.
• From the ends of the valves you need to install plastic plugs.
• Handles are attached to the "wings" to open a greenhouse.

The size of the finished butterfly greenhouse will be 2x1.16m.

Installation

To greenhouse confidently stood in place, you must install it on a wooden frame. To do this, cut out boards from boards 2 m and 1.16 m long (2 pieces each), connect them. Then the greenhouse itself is installed and fixed on the wooden base. Now you can transfer it to any area and start growing plants.

Butterfly greenhouse: advantages and disadvantages

This design has many advantages:

• Allows you to efficiently use the area.
• Working with landings is very convenient.
• Ventilation is possible.
• Convenient opening thanks to shock absorbers.
• High structural strength.
• Easy assembly.
• Low manufacturing costs.
• Long service life.
• Easy to care.

The disadvantages of the butterfly greenhouse include:

• poor quality factory processing holes;
• poor paint coating frame;
• weak hinges.

As you can see, all these disadvantages are present only if you buy a greenhouse. In the manufacture of buildings with their own hands, they will not.

After reading the article, you learned how to make a greenhouse butterfly with his own hands. A little time, money and the desire to improve the site - and you can grow your favorite plants throughout the year.