Reasons and ways to remove trees with a saw cut

Spil of dead wood is an important part of caring for the appearance of plants in both its own garden and in city squares. But often the question is about what methods the cut will be made of and whether a special permit is needed for it.

The reasons for carrying cut

The cutting of emergency trees can prevent various consequences: rupture of communications, transfer of diseases to other plants, etc. But there are even more reasons than consequences. So, the cutting of trees on any site is made if:

• tree hinders the development of other plants
• does not bear fruit
• old tree
• strong wind can cause a fall
• inability to conduct communications or damage
• unfavorable location
• has diseases or pests

Ways

In order to dry does not interfere in the territory, there are many ways to remove it.All worth remembering only about security. After all, working with a chainsaw, an ax and other equipment is very dangerous. Of course the easiest way to do everything yourself, if it concerns your site. But calling companies that specialize in cutting down emergency trees would be the best option.

If it comes to municipal territory, then you should remember the utilities that are required to carry out such work. After all, qualified professionals will be able to choose the best way to cut.

Whole

This method is used when it is impossible to harm nearby objects. Removal of the whole stem may occur when using tilt. Initially, an inspection of the site of the fall. Next, cut a wedge. It will be the beginning for the fall vector. It remains only to finish the trunk on the other side. And thanks to the already natural tilt the tree falls.

The saw cut is entirely the fastest and most inexpensive, since it does not use climbing technologies. But it will be dangerous if the trunk has little free space to fall..

Another option for cutting the whole thing is to use quickdraws. In this method, the main part will be the fixing of mounting blocks (polypaste blocks).

The whole structure is fixed at the top of the deadwood, which allows you to gently lower the trunk to the desired angle and do all the same stages of work as with the saw, with a natural tilt.

It is sometimes difficult to cut a tree in the yard or any other place due to the fact that the same, but healthy trunks can stand very close. In such a situation it will be advantageous to use the descent. So, between healthy plants, a rope is stretched horizontally. It will serve as insurance and will not allow the trunk to fall sharply. Again, the guide and main saw are made.

When there is a fall on the climbing ropes, it begins its smooth descent. Do not forget about good knots that will prevent the gap of insurance. And also about how many kilograms your construction will withstand.

Piecemeal

Often cut down in parts can be seen in urban environments.For example, when the object is located near the road. The arborist climbs on special equipment to the top of the tree and begins to cut the driest parts of it. In this case, the branches can simply fall to the ground. In this case, as in all, a chainsaw is used. And work is carried out when the trees are not yet in bloom. That is, in March.

With a smooth descent

This method helps to control the descent of branches and is favorable in a small area with a high density of planted plants or in urban environments. To begin with, all branches are removed from the crown. This is due to the fact that they are tied up with ropes and with the help of special equipment they gently descend to the ground. Then cut off parts of the trunk.

Self-cutting of large trees is dangerous. Therefore, skilled arborists will be able to do this difficult process better than you.

With aerial platform

The method, which involves a tower, is considered ideal if near the deadwood held power lines. Climbing equipment allows you to get to the emergency tree from any direction. Such a cut is recommended because it takes less time and is unlikely to collapse a dry stem.

Cleaning after sawing

After the cut is necessary to uproot the stump and level the ground. For processing or exporting branches, you also need specialized equipment (for example, shcheporez). To root out the stump, you can use any chemical means or do it manually with a shovel. Possible option to leave it.

But in this way, the appearance of the territory will not look good. The more roots you cut, the easier it is to cope with another part of the stump.

Is it possible to cut down the tree?

Of course, the cut down of emergency trees can be made independently. But only on your site. In any other case, an application is made to cut down trees. For this, however, compelling reasons are needed. These may be a close location, a security breach, because of the dense crown daylight does not enter the housing.

Where to go:

1. To the owner of the land
2. In housing and communal services, if a tree is in the municipal territory
3. Garden partnership,if the location of the tree falls under their control

The main thing to remember about one thing: dead wood cut in foreign territory is strictly prohibited by law.

So, before cutting or other work, you must make sure that the tree is in a good condition. Only if the above reasons and the impossibility of removing them by other means are found, then the option of sawing will be suitable.

But do not forget about safety - large tree trunks can be removed only with the help of skilled workers. This will help both utilities and private companies.