Motoblock - an indispensable unit for a small farm and for the dacha. The scope of application of this technique is very extensive, especially since the production of units does not stand still, releasing newer and improved models. In this article we will talk about the Salute 100 motoblock.
- "Salute 100": device description
- Specifications "Salute 100": features of the model
- Full complete set of the Salute 100 motor-block
- What can the walker in your garden
- How to use the motorbike "Salute 100"
- Advantages and disadvantages of the Salute 100 motor-block
"Salute 100": device description
The Russian plant of OAO GMZ Agat in the Yaroslavl region, where the Salyut tillers are manufactured, began production of these units back in 2002. "Salute 100" is a unit with multiple uses. The list of works performed by the miracle technique allows using the tiller as a snowplow, for harrowing, and much more.
The Salyut 100 motorblock has a gasoline engine, it is also expected to produce a diesel engine, which ensures longer operation. This mechanism works in the drive and trailer condition.The cart of the motor-block thanks to it can move with a speed up to 8 km / h.
The Salyut 100 motoblock is probably the best Salyut model today: it has a small weight and size, it is easy to control, the model has greater efficiency and reliability in operation, maintenance and transportation of the unit are not difficult.
Specifications "Salute 100": features of the model
The characteristics of the motoblock are impressive:
- Engine salute tiller: Lifan 168F-2B, OHV; horizontal shaft; 196 cm3.
- Transmission: belt grip; gear reducer; 4 forward gears, 2 rear, there is the possibility of rearrangement of the driving pulley; power takeoff with pulley.
- Average speed: 2.8-7.8 km / h.
- Power of the Salyut motoblock (max.): 4.8 kW (6.5 hp) at a speed of 3,600 per minute.
- Fuel tank capacity: 3.6 liters.
- Capacity crankcase for oil: 0.6 l.
- Transport track: 360/650 mm.
- Diameter of mills: 320 mm.
- Width of processing (at cultivation): 300/600/980 mm; depth - up to 250 mm
Full complete set of the Salute 100 motor-block
The complete set of equipment for the motoblock includes: six pieces of separate cutters for soil, disks protecting vegetation; mobile milling guards; two wheels and bushings to the axles; opener; bracket for suspension components; oil dipstick; instruments.
The following equipment can be connected to this modification of the tiller: rotary and finger mowers, snow thrower, broom-brush, shovel.
On the motor-cultivator "Salute", special knives-shaped cutters are installed; for easier entry into the ground, the knives are made in the shape of a sickle, made of reliable spring steel. The package includes three pairs of bolt cutters that connect steel fingers.
What can the walker in your garden
The most varied work with the Salyut tiller block can be performed:
- the unit cultivates the ground effortlessly, plows, forms furrows, loosens and harrows the ground;
- walking tractor mows grass on lawns, cleans garden paths;
- with it you can spud plantings and dig up tubers and roots;
- walk-behind tractor is able to pump water and carry any cargo;
- a snow blower for the Salyut motoblock is provided for winter.
How to use the motorbike "Salute 100"
Before starting work on the Salut tiller, you should check that the cutters are installed correctly: you can check the instructions. Installing a coulter will greatly facilitate the work, the unit will not be hard to dig into the soil, and you will not make much effort.
When plowing the soil in several approaches, change direction. It is better and easier to work on dry land. If you have passed the first time, lifting a wet layer, then do not rush - let it dry. Another tip: always check the oil level, fill the unit with high-quality gasoline, and there will be no problems with the equipment.
Advantages and disadvantages of the Salute 100 motor-block
The advantages of the Salut tiller is in its small size, it makes it easy to maintain and manage.Also to the advantages include gear reducer, which allows you to easily adjust the speed and transmission and belt drive clutch. By the way, about the belts: judging by the reviews, the native belts on the motoblock do not withstand long-term operation, and it is worthwhile to immediately replace them with more reliable ones. The advantages include the steering gear and transmission. Now, to manage them, do not have to bend over and make efforts.
This model is considered the best Salute tiller for the upgraded modification of the steering handles. They are made to be streamlined and ergonomic, which smooths the vibration when working. The same applies to the clutch levers: before it was made of metal and could pinch the hand when switching, now it is made of plastic, does not pull up and does not require application of force. The tiller has reliable and well thought-out hitch, evenly distributing the weight and effort in working with the attachments.
The disadvantages include only low-quality belts and a small angle of the lifting arms.
This article takes into account almost all the facts about the Salut motoblock, it remains to be summarized: undoubtedly, a similar unit is needed in the garden, as it greatly facilitates the work in the garden and in the garden.With a minimum of effort, you can do a lot of work with the help of a walk-behind tractor and not only in the summer season.